Launch X431 PAD VII Elite PAD 7 Automotive Diagnostic Tool with Smartlink C VCI With 2 Years Free Update Online

Launch X431 PAD VII Elite PAD 7 Automotive Diagnostic Tool with Smartlink C VCI With 2 Years Free Update Online

Newly Added Functions:

• NEW! Adds EV diagnostic kit for new new Energy Battery vehicles
• NEW! Adds “X-431 FIX” function (Need to purchase from Mall)
• Online ECU Programming: Easily reprogram ECU modules on 30+ vehicle brands.
• 3-in-1 SmartLink C Device: Work as VCI to obtain vehicle data; Provide dual diagnostic modes; Act as a J2534 programming device.
• Topology Mapping: Visually show you all system relationships and DTC in color topology.
• OBD PIN Detection: Detect the vehicle protocols and OBDII pin voltage status to help technicians judge the OBD2 interface.
• Diagnostic Plan: Provides a plan to guide you on how to repair based on the currently detected fault codes.
• User Information: A large amount of diagnostic data is well stored in this module, including Reports, Order, Live Data Stream, etc.
• NEW Remote Diagnosis asking for expert help even thousands of miles away.
• Gain Renault SGW diagnostic access by using optional unlocking software and device.
• How to Activate New Energy Battery Pack to Launch X431 PAD VII/V? Pls Click Here

Note: 

• X431 PAD VII user manual is in device APP
• Tips To Help you Choose X431 Series Diagnostic Tablet: Check Here>>
• Supports Australian Ford and Holden, Brazilian, Indian and Malaysian cars
• Buy now can send free X431 X-PROG3 [Clone Mercedes Benz ECU 2015 upwards with X431 XPROG III] 
• PAD VII Can Support ADAS Calibration, But Clients Need To Buy the ADAS Devices To Make It. Without ADAS Devices, Can Not Do ADAS Calibration by PAD VII Only

Launch X431 PAD VII  Features
1. Full system vehicle coverage for U.S., Asian and European markets over 110 brands, which is continually updated
2. Upgrade and expand the X-431 PAD VII with more software and service via the new module ‘MALL’ as demanded
3. Real-time voltage display helps technician to monitor the voltage condition of vehicle during the diagnosis
4. Topology mapping gives a visual checking on DTCs and all systems communication status
5. Support automotive communication protocols CAN/CANFD/DoIP and automotive communication standards J2534/D-PDU/RP1210
6. Auto-detects the communications protocol of the vehicle and assist to check automotive OBDII port pin damaged or not
7. Intelligent diagnostic enable identify VIN automatically and access system quickly
8. Guided function for VW and AUDI
9. Optional ADAS calibration function increases more revenue
10. Advanced coding and programming function
11. An extended solutio to support TPMS service
12. 2.4GHz & 5GHz dual band communication ensures quick and stable connection
13. Empower technician to diagnose light, medium & heavy duty vehicles with Smarlink C
14. The basic functions include read & clear DTC, remote diagnosis, Bi-directional control, live data graph, wireless software update etc.
15. Build-in repair information and training video modules help to track and fix issue fast
16. Support some car makes coverage till 2023, incl. BMW, Benz, VW, Audi, GM, Ford, Chrysler, Toyota, Nissan, Honda, Land rover etc
17. Multi-language: English, German, Italian, French, Spanish, Portuguese, Chinese, Korean, Turkish, Swedish, Japanese, Polish, Czech, Russian, Dutch, Thai, Finnish, Danish, Romanian, Arabic, Persian, Hebrew, Croatian

Super Hardware Configuration

• 5G WiFi Communication automatically connects within 20 meters, far better than traditional BT connection in transmission rate, diagnostic
• The remarkably powerful 8-core Cortex-A53 Processor (2GHz) enhances the speed of your programming and diagnostics.
• Experience a visually stunning view with the large and Ultra-sharp 13.3″ (1920*1080) Touchscreen, while the Gorilla Glass provides outstanding scratch resistance.
• Benefit from the internal 4G+64G (expandable up to 256G) onboard memory, ideal for storing materials.
• The rechargeable lithium-polymer battery with an impressive capacity of 18,720Ah enables continuous operation for up to 20 hours.
• Connect effortlessly and work from any location in the service bay, thanks to the wireless scanning capability and dual 2.4&5GHz Wi-Fi connection.
• The finely-tuned Android 9.0 KitKat ensures rapid boot-up in just seconds and smooth multitasking.
• IP65 Rating effectively withstands low-pressure jets of water from all directions without any harmful effects.
• 180° Adjustable Kickstand allows for more convenient viewing angles, hands-free operation, and space-saving. It also prevents the diagnostic tool from tipping over or sliding on smooth surfaces.
• Its Sleek & Lightweight Tablet-style design features a capacitive touchscreen that responds to your every gesture.

Add-on Features:
X431 PAD VII also supports 8 extended modules such as videoscope, oscilloscope, sensor box, TPMS tools, key immobilizer and battery tester. With these extended modules, technicians are available to solve high level faults with ease, to make thouse extended modules, you need to pay and buy the following extended adapters, please notice
1. X431 VSP-600 Videoscope (Mainly applied to check unseen parts of engine, fuel tank, braking system, etc.)
2. X431 TSGUN (Not only can you use it to activate the sensor’s ID, tire pressure, sensor frequency, tire temperature, and battery status; you can also program sensor data to a blank LAUNCH brand sensor in three ways: Auto, Manual, and Activation Copy; at the same time, you It can be used to write the newly programmed sensor ID to the vehicle ECU.)
3. X431 X-PROG III(IMMO For VAG Group Above 3.5,advanced immobilizer & key programmer)Vehicles that require cloning are not compatible with this accessory
4. X431 ADAS Moblie/ADAS PRO (Calibrate a wide range of camera-based & radar-based driver assistance systems)
5. X431 Printer (Print out diagnostic data/reports.)
6. X431 BST360 Battery Test.(For Battery Cranking system Test, Battery Charging system Test, Battery Health Test)
7. S2-2 Sensor Box. (Designed to test and simulate most vehicle sensors. quickly troubleshooting the ECU)

Why is the LAUNCH X431 PAD VII scan tool more powerful than another diagnostic tool?

• Saving More Time: The LAUNCH PAD Ⅶ scan tool could quickly and accurately identify problems stored in the car’s onboard memory, greatly lessening time in the garage.
• Spending Less Cost: With the Smartlink C device, LAUNCH X431 PAD Ⅶ can download OEM software to address problems such as the engine, ignition, fuel injection performance, and rpm levels, effectively preventing a small problem from developing into a more serious and more costly fault.
• Serve More Vehicles: Compatible with 30+ worldwide vehicle brands.
• Online programming tool X431PAD VII does not require an expensive online account, just connect to WIFI, saving maintenance costs.
• The smart box adopts dual WIFI communication to improve programming speed, thereby reducing the possibility of programming errors
• When using the J2534 tool, in addition to the connector, it is also necessary to consider issues such as adapting the computer, installation costs, and complete functions, which are not cost-effective.

ECU Programming of LAUNCH PADⅦ VS. Other -Covering More Programming

• Online Programming: Mercedes Benz and BMW. Downloading the newer data from the online server and reprogramming it to the ECUs.Updating data and upgrading ECU software version.
• J2534 Programming: Working together with SmartLink VCI (J2534 pass-thru device) to perform J2534 programming.
• Offline Programming: Renault, Nissan, Subaru, Hyundai, Kia, Chery, Jaguar, Land rover, Porsche Program adaptive data for certain ECU modules after repair.

ECU Programming & Coding

Online ECU Programming: For Benz & BMW All Chassis/Series

LAUNCH PAD VII stores the extensive programming data of Ben.z and B.M.W in the cloud server, in case of interrupted access if your hard drive has issues.

Unlike any regular scan tools on the market, this car diagnostic tool intelligently guides you through each necessary ECU programming procedure to find the solution patch, avoiding unnecessary steps, and all are presented in a user-friendly interface that is easy to learn and navigate.

• And the “Programming Backup/Restoration” function is an evolutionary smart solution designed to help you safeguard and restore the original programming data:
• It reverts the ECU data changes back to the previous state, in case of human error, system failure, or data loss that could brick the vehicle computer.
• It allows you to create a backup of your current Values, Adaptations, and other information (such as Advanced ID and Live Data) for a specific control module, and save them into your scan tool as a backup.
• Simply select the saved historical backup record, and you’ll effortlessly get reverted back to the old programming values in a control module.
• Currently this function is compatible with all series of Ben.z vehicles & B.M.W F/G/I chassis models.
• Reminder: Message us to get the “How to Open Online ECU Programming” guidance documents.

J2534 ECU Programming: For More J2534-Compliant Cars

With the SmartLink C VCI Box serving as J2534-1 & -2 pass-thru device (valued at over 2000 bucks), you can easily expand your ECU programming abilities for over 30 car brands (compatible with For.d, V-W, Aud.i, Skoda, Sitter, Land Rover, Jaguar, Porsche, Renault etc.). You don’t need to buy separate OE scan tools for each brand. Reminder: message us to get the “J2534 Operating Manual” for more information.

Highlights of LAUNCH PRO5’s ECU Coding

What separates the LAUNCH PAD VII as a high-end diagnostic scanner from most standard OBD2 scan tools is its advanced ECU Coding. It allows you to connect to the car’s ECU system, set up new car modules, and adjust the original car settings.

• Recode elements of a car’s CPU. This is particularly useful if you need to setup new actuators and wants to make sure that they work in harmony with the rest of the subsystem.
• Personalized Car Settings. Open the hidden car features that are not available in ordinary settings. For example: seat belt alarm, automatic sta.rt/st.op, hidden menu, daytime running lights, cruise control, comfortable windscreen washer, welcome light, and others.

Reminder: Available coding operations vary by the test vehicle. ONLY the available operations display in the menu.

2023 Newly Upgrades for ECU Programming/Coding

• For BMW: expand ECU programming/coding, open hidden functions, modifications … options, up to 2023.
• For Benz: expand offline coding features (open hidden functions) up to 2021; supports manual programming/coding operating options to handle more repair scenarios.
• For VW/Audi: more comprehensive online calibration coding data; support subsystem mode.
• For Nissan/Infiniti: more detailed annotations for coding, e.g. the BCM of the 2018 Nissan Sentra.
• And more. Reach us to get the complete list.

X431 PAD VII Elite Functions

ALL System Diagnosis

Powerful all system diagnostic functions (intelligent diagnosis, remote diagnosis, read DTC, clear DTC, read data stream, actuation test), accurate diagnostic data, and abundant special functions.
Local diagnose:When the intelligent diagnosis is not available in an environment without network, choose traditional diagnosis. Select the vehicle make and model manually to perform the vehicle detection.
Real-time voltage display helps technician to monitor the voltage condition of vehicle during the diagnosis
Intelligent diagnostic enable identify VIN automatically and access system quickly

You can expect the LAUNCH X431 PADVII to provide you with extensive knowledge every time you use it. It offers over 10,000GB of a repair database, covering more than 1,600 vehicle models. This is a tremendous aid for those who want expert assistance in fixing car issues:

• 12-in-1 Graphic Live Data Stream: The LAUNCH X431 scanner displays a multi-PID live data stream in dynamic graphics, showing up to 12 PIDs on one screen! This allows you to effortlessly analyze the correlations between different sensors, actuators, and calculated values at a single glance. Every detail, from engine speed to temperature and mass airflow, is presented. Also, you can record/playback the readout or graph, capture screenshots and easily share them.
• DTC Help & Fault Guidance: When reading DTCs, this scan tool also provides a vehicle-specific list of possible causes, and can even provide a list of the most common fixes. Also, it will help you find the fault through step-by-step guidance based on the trouble code.
• Operation Tips: Give you the information needed to clear the faults, simplifying the analysis and repair process. You’ll have a mind-blowing experience like following an expert to fix every hassle you’d meet while repairing.
• Technology Handbook: This car scanner offers an extensive range of valuable information specifically included, such as wiring diagrams, control unit locations, and other repair materials necessary to efficiently accomplish your tasks.
• Training Videos: Here you can check the repair process relevant to specific vehicles in the real world, in videos, to learn new skills, understand complex concepts, and even master specific tasks.

At-A-Glance Topology Mapping: See More, Operate Less

If you have a busy garage with multiple cars awaiting repairs, topology mapping is essential. LAUNCH PAD VII can quickly display faults in a color-coded format, allowing you to locate the issue within minutes. Just click on a module to identify the underlying cause:

• Show All Available Control Units: get a quick scan on all available onboard car systems, and show you the scan results (DTCs) at a glance.
• Color-coded Communication Structure: Red – faulty systems; Green – healthy systems; Grey – unavailable systems; making it much easier for you to understand the layout and structure of the car’s electrical system.
• View Diagram Tree in Detail: if a fault code points to a specific sensor issue, you can efficiently pinpoint the sensor and uncover any related components connected to it.
• Click to Identify Underlying Cause: this quick identification of the root cause of a problem can help you instantly determine the underlying issue, saving time and effort.
• Easy to Locate System Faulty Parts: this reduces the chances of misdiagnosis and the risk of replacing unnecessary parts, making sure you’ll have an effective solution.

BI-Directional Control [Active Test]

LAUNCH X431 PAD VII ELITE performs the active test, which bypasses the onboard control systems to send commands to modules to perform specific tests. By monitoring their responses, you can precisely locate the faults, and shorten the troubleshooting time without tearing the vehicle apart. It can:

• Rolling up / down a window;
• Turning the fuel pump on and off;
• Cycling the a/c clutch on and off;
• …

99% Daily Maintenances: 60+ Basics & Advanced Special Services Included

To save the hassle to search for the most used services in car software, PAD VII thoughtfully integrates the hottest services into the independent “Special Function” module to serve necessary resets/relearns for 99% car models on the road, which include: