5 Tokens Xhorse VVDI2 BAG MB TOOL BENZ Password Calculation
- Password calculation can be obtained through the EIS and working key (online).
- All CAN protocol EIS support password calculation.
- Supports BGA keys and other NEC keys.
- Supports password calculation for NEC v51, v57 keys.
- No soldering, safe method.
- Data acquisition time depends on the key version. It takes about 3.5 to 13 minutes.
- The BGA version takes about 5 minutes, and some versions only take 3.5 minutes.
- Calculation time on the server: 30 seconds – 1 minute.
Supported Types:
- W164
- W164 2009-
- W166, 197, 212, 218, 246
- W169, 209, 211
- W172, 204, 207
- W216
- W221
- W639 2009-
Functions:
- Mode: OBD and IR adapter, mode used to communicate with EIS
- Chassis: Select the chassis number. You can detect it with auto-detection in EIS Tools.
- Data Acquisition:
- Press “Data Acquisition”.
- Insert the working key into the ignition and wait 15 seconds.
- Insert the working key into the device’s IR reader to verify the key and car.
- Data acquisition.
- Insert the working key into the ignition and wait 30 seconds.
- Insert the working key into the device’s IR reader and wait for the process to end.
- Save the acquisition data.
- Upload Data: Upload the saved acquisition data to the server to calculate the password.
- Attention: Once the password for one SSID has been successfully calculated, the server will not accept calculation of acquisition data with the same SSID for 2 hours. After 2 hours, acquisition data with the same SSID uploaded to the server will start a new task.
- Query result: Query the server calculation result. The password will be automatically filled in the key password area after successful calculation. Use “Copy” to copy the password to the clipboard.
- Auto reflash: The program will automatically re-flash the server result until there are no tasks for this device. You can start data acquisition again while auto-reflash is running.
- Stop acquisite after success: If you are running data acquisition while auto-reflash is running, the program will stop the acquisition progress when the correct password is found.
About Query Result Status:
- The query result supports querying the calculation result within 24 hours. Others do not support it.
- The query result will display Time, SSID, Status, Filename (name when uploaded to the server).
- Status has the following types:
-
- Queuing: number x, requires about y minutes, means your task needs y minutes.
- Processing: requires 1 minute, means your task needs 1 minute to finish.
- Password: xxxxxxxxxxxxxxxx (Free), means successfully found password, “Free” shows that this task was calculated for free or this task was already successfully calculated before.
- Discard: Once you successfully calculate the password, within 2 hours, the upload acquisition data with the same SSID will be discarded.
- Already upload: means the server already has this file in queuing.
- Pay for password calculation before upload: means your device does not have authorization for calculation. Contact your dealer and pay for password calculation.
- Failed: means this task failed to get password, you can run data acquisition again. Failed tasks are always free.
-
\
Reviews
There are no reviews yet.